AZM300Z-ST-SD2P-A Schmersal Safety Switches

Product Details

• Operation current
  150 mA
• Wiring capacity
  50 nF
• Test pulse interval, typical
  1000 ms
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Versions
  short-circuit proof, p-type
• Current consumption at 24V
  5 mA
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse interval, minimum
  100 ms
• Classification ZVEI CB24I, Source
  C2
• Duty cycle solenoid
  100 %
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Current consumption with solenoid ON, average
  200 mA
• Test pulse duration, maximum
  0.5 ms
• Required rated short-circuit current to EN 60947-5-1
  100 A
External wiring and device fuse rating
2 A gG
Switching frequency, maximum
0.5 Hz
Rated impulse withstand voltage Uimp
0.8 kV
No-load supply current I0
100 mA
Operating voltage, maximum
26.4 VDC
Notes (Power supply, general)
stabilised PELV power supply
Degree of pollution to IEC/EN 60664-1
3
Operating voltage, minimum
20.4 VDC
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Protection rating
III
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Relative humidity, maximum
93 %
Storage and transport temperature, maximum
+90 °C
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, minimum
-10 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
+0 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Height of sensor
35 mm
Length of sensor
120 mm
Length of sensor chain, maximum
200 m
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance OFF Sar
20 mm
Ensured switch distance ON Sao
1 mm
Width of sensor
87.5 mm
Switch distance
2 mm
Type of the fixing screws
2x M6
Tightening torque of the fixing screws, minimum
6 Nm
Latching force, adjustable, position 2
50 N
Tightening torque for the fixing screws, maximum
7 Nm
Clamping force, maximum Fmax
1,500 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Latching force, adjustable, position 1
25 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Angular offset between interlocking device and actuator, maximum
2 °
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Safety functions
Yes
Number of fail-safe digital outputs
2
Series-wiring
Yes
Short-circuit recognition
Yes
Short circuit detection
Yes
Latching
Yes
Manual release
Yes
Power to lock
Yes
Guard locking monitored
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Serial diagnostics
Yes
Duration of risk, maximum
200 ms
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Active principle
RFID
Gross weight
550 g
Time to readiness, maximum
5,000 ms
Frequency band RFID
125 kHz
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
general information
Universal coding
Transmit power, maximum
-6 dB/m
Coding level according to ISO 14119
Low

AZM300Z-ST-SD2P-A Related Documents