AZM300Z-I1-ST-1P2P-A Schmersal Safety Switches

Product Details

• Height of sensor
  35 mm
• Width of sensor
  87.5 mm
• Note (series connection of the sensors)
  Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
• Length of sensor
  120 mm
• Note (length of the sensor chain)
  Cable length and cross-section change the voltage drop dependiing on the output current
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Length of sensor chain, maximum
  200 m
• Ensured switch distance OFF Sar
  20 mm
• Tightening torque for the fixing screws, maximum
  7 Nm
• Ensured switch distance ON Sao
  1 mm
• Tightening torque of the fixing screws, minimum
  6 Nm
• Clamping force, maximum Fmax
  1,500 N
• Clamping force in accordance with ISO14119 Fzh
  1,150 N
• Type of the fixing screws
  2x M6
• Latching force, adjustable, position 2
  50 N
• Switch distance
  2 mm
• Latching force, adjustable, position 1
  25 N
• Mechanical life, minimum
  1,000,000 Operations
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Angular offset between interlocking device and actuator, maximum
  2 °
Integral System Diagnostics, status
Yes
Number of fail-safe digital outputs
2
Safety functions
Yes
Short-circuit recognition
Yes
Series-wiring
Yes
Latching
Yes
Short circuit detection
Yes
Manual release
Yes
Guard locking monitored
Yes
Duration of risk, maximum
200 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Coding level according to ISO 14119
High
Power to lock
Yes
Test pulse interval, typical
1000 ms
Current, Utilisation category DC13
0.05 A
Voltage drop Ud, maximum
4 V
Current leakage Ir
0.5 mA
Current, Utilisation category DC12
0.05 A
Voltage, Utilisation category DC13
24 VDC
Versions
short-circuit proof, p-type
Voltage, Utilisation category DC12
24 VDC
Classification ZVEI CB24I, Sink
C1, C2
Classification ZVEI CB24I, Source
C2
Test pulse interval, minimum
100 ms
Current consumption at 24V
5 mA
Test pulse duration, maximum
0.5 ms
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Duty cycle solenoid
100 %
Switching frequency, maximum
0.5 Hz
External wiring and device fuse rating
2 A gG
Current consumption with solenoid ON, peak
350 mA / 200 ms
Required rated short-circuit current to EN 60947-5-1
100 A
Current consumption with solenoid ON, average
200 mA
Operating voltage, maximum
26.4 VDC
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Degree of pollution to IEC/EN 60664-1
3
Operating voltage, minimum
20.4 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Protection rating
III
Restistance to shock
30 g / 11 ms
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
93 %
Storage and transport temperature, maximum
+90 °C
Storage and transport temperature, minimum
-10 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
+0 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Time to readiness, maximum
5,000 ms
Active principle
RFID
Transmit power, maximum
-6 dB/m
Frequency band RFID
125 kHz
general information
Individual coding
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight
550 g

AZM300Z-I1-ST-1P2P-A Related Documents