AZM300Z-I1-ST-1P2P Schmersal Safety Switches

Product Details

• Voltage, Utilisation category DC12
  24 VDC
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Voltage drop Ud, maximum
  4 V
• Current leakage Ir
  0.5 mA
• Test pulse interval, typical
  1000 ms
• Current, Utilisation category DC12
  0.05 A
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse duration, maximum
  0.5 ms
• Test pulse interval, minimum
  100 ms
• Duty cycle solenoid
  100 %
• Current consumption at 24V
  10 mA
• Switching frequency, maximum
  0.5 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• External wiring and device fuse rating
  2 A gG
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• No-load supply current I0
  100 mA
Notes (Power supply, general)
stabilised PELV power supply
Current consumption with solenoid ON, average
200 mA
Operating voltage, maximum
26.4 VDC
Degree of pollution to IEC/EN 60664-1
3
Operating voltage, minimum
20.4 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Relative humidity, maximum
93 %
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Storage and transport temperature, maximum
+90 °C
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Rated insulation voltage Ui
32 VDC
Ambient temperature, maximum
+60 °C
Storage and transport temperature, minimum
-10 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Ambient temperature, minimum
+0 °C
Width of sensor
87.5 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Length of sensor
120 mm
Height of sensor
35 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor chain, maximum
200 m
Terminal Connector
Connector M12, 8-pole, A-coded
Latching force, adjustable, position 1
25 N
Type of the fixing screws
2x M6
Tightening torque for the fixing screws, maximum
7 Nm
Ensured switch distance ON Sao
1 mm
Latching force, adjustable, position 2
50 N
Switch distance
2 mm
Ensured switch distance OFF Sar
20 mm
Tightening torque of the fixing screws, minimum
6 Nm
Clamping force, maximum Fmax
1,500 N
Angular offset between interlocking device and actuator, maximum
2 °
Clamping force in accordance with ISO14119 Fzh
1,150 N
Integral System Diagnostics, status
Yes
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Number of fail-safe digital outputs
2
Mechanical life, minimum
1,000,000 Operations
Short circuit detection
Yes
Series-wiring
Yes
Safety functions
Yes
Short-circuit recognition
Yes
Manual release
Yes
Latching
Yes
Guard locking monitored
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Power to unlock
Yes
Duration of risk, maximum
200 ms
Frequency band RFID
125 kHz
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Time to readiness, maximum
5,000 ms
general information
Individual coding
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Transmit power, maximum
-6 dB/m
Gross weight
550 g
Coding level according to ISO 14119
High
Active principle
RFID

AZM300Z-I1-ST-1P2P Related Documents