AZM300B-ST-SD2P-A Schmersal Safety Switches

Product Details

• Operation current
  150 mA
• Wiring capacity
  50 nF
• Test pulse interval, typical
  1000 ms
• Current consumption at 24V
  5 mA
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Versions
  short-circuit proof, p-type
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Test pulse interval, minimum
  100 ms
• Test pulse duration, maximum
  0.5 ms
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• External wiring and device fuse rating
  2 A gG
• Current consumption with solenoid ON, average
  200 mA
• Duty cycle solenoid
  100 %
• Switching frequency, maximum
  0.5 Hz
Current consumption with solenoid ON, peak
350 mA / 200 ms
Required rated short-circuit current to EN 60947-5-1
100 A
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Degree of pollution to IEC/EN 60664-1
3
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Rated insulation voltage Ui
32 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Restistance to shock
30 g / 11 ms
Relative humidity, maximum
93 %
Note (Relative humidity)
non-condensing, non-icing
Width of sensor
87.5 mm
Storage and transport temperature, minimum
-10 °C
Storage and transport temperature, maximum
+90 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
+0 °C
Height of sensor
35 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Length of sensor
120 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Terminal Connector
Connector M12, 8-pole, A-coded
Length of sensor chain, maximum
200 m
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Ensured switch distance OFF Sar
20 mm
Tightening torque for the fixing screws, maximum
7 Nm
Type of the fixing screws
2x M6
Ensured switch distance ON Sao
1 mm
Switch distance
2 mm
Tightening torque of the fixing screws, minimum
6 Nm
Latching force, adjustable, position 2
50 N
Clamping force, maximum Fmax
1,500 N
Angular offset between interlocking device and actuator, maximum
2 °
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Number of fail-safe digital outputs
2
Latching force, adjustable, position 1
25 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Safety functions
Yes
Mechanical life, minimum
1,000,000 Operations
Series-wiring
Yes
Integral System Diagnostics, status
Yes
Short-circuit recognition
Yes
Manual release
Yes
Actuator monitored
Yes
Serial diagnostics
Yes
Latching
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Power to lock
Yes
Short circuit detection
Yes
Active principle
RFID
Frequency band RFID
125 kHz
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
general information
Universal coding
Time to readiness, maximum
5,000 ms
Coding level according to ISO 14119
Low
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight
600 g
Transmit power, maximum
-6 dB/m
Duration of risk, maximum
200 ms

Related documents AZM300B-ST-SD2P-A Specs