FWS 2505 C UE: 24...230V AC/DC Schmersal Electronic Components

Product Details

• EMC rating
  10 V/m
• Switching capacity, minimum
  10 mA
• Input signal, LOW Signal 0
  0 … 2 VDC
• Conduction resistance, maximum
  40 Ω
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Switching capacity, maximum
  24 VDC
• Current, Utilisation category DC13
  2 A
• Voltage, Utilisation category DC13
  24 VDC
• Voltage, Utilisation category AC15
  230 VAC
• Electrical power consumption, maximum
  5 W
• Current, Utilisation category AC-15
  3 A
• Note (Contact resistance)
  in new state
• Contact resistance, maximum
  0.1 Ω
• Rated AC voltage for controls, 50 Hz, minimum
  20.4 VAC
• Rated AC voltage for controls, 60 Hz, minimum
  20.4 VAC
• Rated control voltage at AC 60 Hz, maximum
  253 VAC
• Rated control voltage at DC, maximum
  253 VDC
• Rated operating voltage
  24 ... 230 VAC/DC
• Rated control voltage at AC 50 Hz, maximum
  253 VAC
• Degree of pollution to VDE 0110
  2
Storage and transport temperature, maximum
+70 °C
Restistance to shock
30 g / 11 ms
Storage and transport temperature, minimum
-25 °C
Degree of protection of the mounting space
IP54
Ambient temperature, maximum
+55 °C
Degree of protection of clips or terminals
IP20
Degree of protection of the enclosure
IP40
Width
45 mm
Terminal Connector
Screw connection, rigid or flexible
Number of signalling outputs
2
Terminal designations
IEC/EN 60947-1
Number of LEDs
1
Number of auxiliary contacts
1
Stop-Category
0
Reset after disconnection of supply voltage
Yes
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Rated AC voltage for controls at DC minimum
20.4 VDC
Overvoltage category
III
Resistance to vibrations to EN 60068-2-6
10 ... 55 Hz, Amplitude 0.35 mm
Rated impulse withstand voltage Uimp
4.8 kV
Ambient temperature, minimum
+0 °C
Height
100 mm
Tightening torque of Clips
0.6 Nm
Depth
121 mm
Cable section, minimum
0.2 mm²
Cable section, maximum
2.5 mm²
Mounting
Snaps onto standard DIN rail to EN 60715
Mechanical life, minimum
20,000,000 Operations
Integral System Diagnostics, status
Yes
Number of safety contacts
4
Number of undelayed semi-conductor outputs with signaling function
2
Standards
IEC/EN 60204-1, BG-GS-ET-20, EN ISO 13849-1
Wire breakage detection
Yes
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated
Gross weight
321.5 g
Automatic reset function
Yes
Climatic stress
EN 60068-2-3, BG-GS-ET-14

FWS 2505 C UE: 24...230V AC/DC Related Documents