FWS 2105 A UE: 24...230V AC/DC Schmersal Electronic Components

Product Details

• Switching capacity, minimum
  10 mA
• EMC rating
  10 V/m
• Conduction resistance, maximum
  40 Ω
• Input signal, LOW Signal 0
  0 … 2 VDC
• Switching capacity, maximum
  6 A
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Current, Utilisation category AC-15
  3 A
• Current, Utilisation category DC13
  2 A
• Note (Contact resistance)
  in new state
• Voltage, Utilisation category DC13
  24 VDC
• Voltage, Utilisation category AC15
  230 VAC
• Electrical power consumption, maximum
  5 W
• Contact resistance, maximum
  0.1 Ω
• Rated control voltage at DC, maximum
  253 VDC
• Rated control voltage at AC 60 Hz, maximum
  253 VAC
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Rated control voltage at AC 50 Hz, maximum
  253 VAC
• Rated AC voltage for controls, 50 Hz, minimum
  20.4 VAC
• Overvoltage category
  III
• Rated operating voltage
  24 ... 230 VAC/DC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Degree of pollution to VDE 0110
2
Storage and transport temperature, maximum
+70 °C
Rated impulse withstand voltage Uimp
4.8 kV
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 ... 55 Hz, Amplitude 0.35 mm
Storage and transport temperature, minimum
-25 °C
Ambient temperature, minimum
+0 °C
Ambient temperature, maximum
+55 °C
Degree of protection of clips or terminals
IP20
Depth
121 mm
Degree of protection of the mounting space
IP54
Width
45 mm
Height
100 mm
Terminal designations
IEC/EN 60947-1
Tightening torque of Clips
0.6 Nm
Cable section, maximum
2.5 mm²
Degree of protection of the enclosure
IP40
Cable section, minimum
0.2 mm²
Mounting
Snaps onto standard DIN rail to EN 60715
Terminal Connector
Screw connection, rigid or flexible
Mechanical life, minimum
20,000,000 Operations
Number of undelayed semi-conductor outputs with signaling function
2
Integral System Diagnostics, status
Yes
Number of LEDs
1
Number of signalling outputs
2
Number of safety contacts
1
Standards
IEC/EN 60204-1, BG-GS-ET-20, EN ISO 13849-1
Gross weight
283 g
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Stop-Category
0
Wire breakage detection
Yes
Material of the contacts, electrical
Ag-Ni + Au
Automatic reset function
Yes
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Reset after disconnection of supply voltage
Yes

FWS 2105 A UE: 24...230V AC/DC Related Documents