RSS16-I2-D-CC Schmersal Safety Switches

Product Details

• Number of fail-safe digital outputs
  2
• Integral System Diagnostics, status
  Yes
• Number of LEDs
  2
• Cascadable
  Yes
• Number of semi-conductor outputs with signaling function
  1
• Actuating panels
  front side, rear, from head
• Series-wiring
  Yes
• Safety functions
  Yes
• Active principle
  RFID
• Diagnostic output
  Yes
• Short-circuit recognition
  Yes
• Housing construction form
  Block
• Standards
  IEC 60947-5-3
• Short circuit detection
  Yes
• Duration of risk, maximum
  200 ms
• Time to readiness, maximum
  2,000 ms
• Reaction time, maximum
  100 ms
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• general information
  Individual coding, multiple teaching
• Coding level according to ISO 14119
  High
Installation conditions (mechanical)
not flush
Active area
lateral, front side, cover-side
Interfering radiation
IEC 61000-6-4
EMC rating
IEC 60947-3
Current, Utilisation category DC13
0.05 A
Voltage, Utilisation category DC13
24 VDC
Current leakage Ir
0.5 mA
Current, Utilisation category DC12
0.05 A
Voltage, Utilisation category DC12
24 VDC
Voltage drop Ud, maximum
2 V
Versions
p-type
Output current, (fail-safe output), maximum
1 A
Rated operating current (safety outputs)
1,000 mA
Switching frequency, approx.
1 Hz
Rated operating voltage, maximum
26.4 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Rated operating voltage, minimum
20.4 VDC
Operating current
50 mA
No-load supply current I0
100 mA
Overvoltage category
III
Voltage type
DC (direct current)
Degree of pollution to VDE 0100
3
Rated insulation voltage Ui
32 VDC
Protection rating
0
Rated impulse withstand voltage Uimp
0.8 kV
Restistance to shock
30 g / 11 ms
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Length of sensor
91 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Width of sensor
52 mm
Height of sensor
30 mm
Ambient temperature, maximum
+70 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Terminal Connector
Spring pulley connection
Ambient temperature, minimum
-25 °C
Ensured switch distance OFF Sar
30 mm
Mounting
2 x M5, Cylinder head screw
Ensured switch distance ON Sao
12 mm
Switch distance
15 mm
Hysteresis (Switch distance), maximum
2 mm
Tightening torque of nuts, maximum
2 Nm
Repeat accuracy R R
0.5 mm
Sensor topology
Sensor for series wiring
Gross weight
275 g

RSS16-I2-D-CC Related Documents