AZM40B-ST-1P2P-PH Schmersal Safety Switches

Product Details

• Voltage, Utilisation category DC13
  24 VDC
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Sink
  C1, C2
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Rated operating voltage
  24 VDC - 15 % / + 10 % (stabilised PELV)
• Storage and transport temperature, minimum
  -40 °C
• Ensured switch distance OFF Sar
  8 mm
• Number of safety contacts
  2
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Current leakage Ir
  0.5 mA
• Voltage drop Ud, maximum
  2 V
• Rated operating current (safety outputs)
  250 mA
• Classification ZVEI CB24I, Source
  C2
• Current consumption at 24V
  5 mA
• Current consumption solenoid at switching moment, peak
  600 mA / 100ms
• Note
  Cable length and cable section alter the voltage drop depending on the output current
• Operating current
  1,200 mA
• Switching frequency, maximum
  0.3 Hz
Required rated short-circuit current to EN 60947-5-1
100 A
No-load supply current I0
100 mA
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to VDE 0100
3
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Protection rating
III
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+55 °C
Ambient temperature, minimum
+0 °C
Width of sensor
40 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Length of sensor
119.5 mm
Terminal Connector
Connector M12, 8-pole, A-coded
Height of sensor
20 mm
Type of the fixing screws
DESIGN_MOUNTING_SCREWS11111111111111111112
Ensured switch distance ON Sao
1 mm
Clamping force, maximum Fmax
2,600 N
Actuating speed, maximum
0.5 m/s
Latching force
40 N
Interlocking principle
bistable
Mechanical life, minimum
200,000 Operations
Clamping force in accordance with ISO14119 Fzh
2,000 N
Safety functions
Yes
Manual release
Yes
Short-circuit recognition
Yes
Latching
Yes
Actuator monitored
Yes
Integral System Diagnostics, status
Yes
Series-wiring
Yes
Short circuit detection
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Reaction time, maximum
100 ms
Coding level according to ISO 14119
Low
Time to readiness, maximum
4,000 ms
Duration of risk, maximum
200 ms
Enclosure material
Glass-fibre, reinforced thermoplastic and light-alloy diecast
Active principle
RFID
Standards
IEC 61508, EN 60947-5-3, EN ISO 13849-1
Gross weight
304.1 g
general information
Universal coding

Related documents AZM40B-ST-1P2P-PH Specs