AES 1185.3 24 VAC Schmersal Electronic Components

Product Details

• EMC rating
  EMC-Directive
• Current, Utilisation category DC12
  0.1 A
• Voltage, Utilisation category DC12
  24 VDC
• Input signal, HIGH Signal 1
  12 … 30 VDC
• Switching capacity, maximum
  2 A
• Current, Utilisation category DC13
  6 A
• Pull-in delay at RESET, typically
  20 ms
• Drop-out delay in case of emergency, typically
  20 ms
• Contact resistance, maximum
  0.1 Ω
• Rated control voltage at DC, maximum
  28.8 VDC
• Electrical power consumption
  5 W
• Rated operating voltage
  24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
• Thermal test current
  4 A
• Overvoltage category
  III
• Resistance to vibrations to EN 60068-2-6
  10...55 Hz, Amplitude 0.35 mm, ± 15 %
• Ambient temperature, minimum
  +0 °C
• Ambient temperature, maximum
  +55 °C
• Tightening torque of Clips
  0.6 Nm
• Number of inputs for NC
  3
• Standards
  IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Reset after disconnection of supply voltage
Yes
Climatic stress
BG-GS-ET-14, IEC 60947-5-3
Material of the contacts, electrical
Ag-Ni, Au
Wire breakage detection
Yes
Input signal, LOW Signal 0
0 … 2 VDC
Conduction resistance, maximum
40 Ω
Switching capacity, minimum
10 mA
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category AC-15
6 A
Voltage, Utilisation category AC15
230 VAC
Pull-in delay at automatic start, maximum, typically
100 ms
Drop-out delay in case of power failure, typically
80 ms
Note (Contact resistance)
in new state
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Rated AC voltage for controls at DC minimum
20.4 VDC
Frequency range
50 Hz, 60 Hz
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Degree of pollution to IEC/EN 60664-1
2
Storage and transport temperature, maximum
+70 °C
Restistance to shock
30 g / 11 ms
Degree of protection of clips or terminals
IP20
Degree of protection of the mounting space
IP54
Rated impulse withstand voltage Uimp
4 kV
Storage and transport temperature, minimum
-25 °C
Height
75 mm
Depth
110 mm
Degree of protection of the enclosure
IP40
Terminal Connector
Screw connection, rigid or flexible
Width
22.5 mm
Cable section, maximum
2.5 mm²
Terminal designations
IEC/EN 60947-1
Mounting
Snaps onto standard DIN rail to EN 60715
Mechanical life, minimum
50,000,000 Operations
Short-circuit recognition
Yes
Gross weight
150 g
Number of safety contacts
1
Number of inputs for NO
3
Number of shutters
3
Number of openers
3
Number of LEDs
1
Automatic reset function
Yes
Integral System Diagnostics, status
Yes
Earth connection detection
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Feedback circuit
Yes
Stop-Category
0

AES 1185.3 24 VAC Related Documents