AES 1165 Schmersal Electronic Components

Product Details

• EMC rating
  EMC-Directive
• Switching capacity, maximum
  24 VDC
• Conduction resistance, maximum
  40 Ω
• Input signal, LOW Signal 0
  0 … 2 VDC
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category AC-15
  6 A
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC12
  0.1 A
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Current, Utilisation category DC13
  6 A
• Switching capacity, minimum
  10 VDC
• Voltage, Utilisation category AC15
  230 VAC
• Pull-in delay at RESET, typically
  20 ms
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Contact resistance, maximum
  0.1 Ω
• Drop-out delay in case of emergency, typically
  20 ms
• Rated control voltage at DC, maximum
  28.8 VDC
• Drop-out delay in case of power failure, typically
  80 ms
• Note (Contact resistance)
  in new state
• Electrical power consumption
  5 W
Rated AC voltage for controls at DC minimum
20.4 VDC
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Frequency range
50 Hz, 60 Hz
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Degree of pollution to IEC/EN 60664-1
2
Thermal test current
6 A
Overvoltage category
III
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Restistance to shock
30 g / 11 ms
Ambient temperature, maximum
+55 °C
Rated impulse withstand voltage Uimp
4 kV
Storage and transport temperature, minimum
-25 °C
Ambient temperature, minimum
+0 °C
Degree of protection of clips or terminals
IP20
Storage and transport temperature, maximum
+70 °C
Degree of protection of the mounting space
IP54
Degree of protection of the enclosure
IP40
Depth
121 mm
Terminal Connector
Screw connection, rigid or flexible
Height
100 mm
Tightening torque of Clips
0.6 Nm
Terminal designations
IEC/EN 60947-1
Width
22.5 mm
Cable section, minimum
0.25 mm²
Cable section, maximum
2.5 mm²
Mounting
Snaps onto standard DIN rail to EN 60715
Integral System Diagnostics, status
Yes
Number of inputs for NC
2
Number of inputs for NO
2
Mechanical life, minimum
20,000,000 Operations
Number of LEDs
1
Number of safety contacts
1
Earth connection detection
Yes
Reset after disconnection of supply voltage
Yes
Gross weight
155 g
Automatic reset function
Yes
Short-circuit recognition
Yes
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Climatic stress
BG-GS-ET-14, IEC 60947-5-3
Wire breakage detection
Yes
Stop-Category
0
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14

AES 1165 Related Documents