AES 1165-2196 Schmersal Electronic Components

Product Details

• Switching capacity, maximum
  2 A
• EMC rating
  EMC-Directive
• Current, Utilisation category DC12
  0.1 A
• Input signal, LOW Signal 0
  0 … 2 VDC
• Voltage, Utilisation category DC12
  24 VDC
• Conduction resistance, maximum
  40 Ω
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Voltage, Utilisation category AC15
  230 VAC
• Drop-out delay in case of emergency, typically
  20 ms
• Rated control voltage at DC, maximum
  28.8 VDC
• Current, Utilisation category DC13
  6 A
• Switching capacity, minimum
  10 mA
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category AC-15
  6 A
• Drop-out delay in case of power failure, typically
  80 ms
• Note (Contact resistance)
  in new state
• Pull-in delay at RESET, typically
  20 ms
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Contact resistance, maximum
  0.1 Ω
• Rated control voltage at AC 50 Hz, maximum
  26.4 VAC
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Electrical power consumption
5 W
Thermal test current
6 A
Rated AC voltage for controls at DC minimum
20.4 VDC
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
Degree of pollution to IEC/EN 60664-1
2
Frequency range
50 Hz, 60 Hz
Storage and transport temperature, maximum
+70 °C
Overvoltage category
III
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated impulse withstand voltage Uimp
4 kV
Storage and transport temperature, minimum
-25 °C
Degree of protection of clips or terminals
IP20
Ambient temperature, maximum
+55 °C
Ambient temperature, minimum
+0 °C
Degree of protection of the enclosure
IP40
Degree of protection of the mounting space
IP54
Depth
121 mm
Height
100 mm
Tightening torque of Clips
0.6 Nm
Width
22.5 mm
Cable section, maximum
2.5 mm²
Terminal designations
IEC/EN 60947-1
Cable section, minimum
0.25 mm²
Mounting
Snaps onto standard DIN rail to EN 60715
Mechanical life, minimum
20,000,000 Operations
Terminal Connector
Screw connection, rigid or flexible
Number of inputs for NC
2
Number of LEDs
1
Number of safety contacts
1
Number of inputs for NO
1
Number of signalling outputs
2
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Integral System Diagnostics, status
Yes
Gross weight
200 g
Short-circuit recognition
Yes
Wire breakage detection
Yes
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Earth connection detection
Yes
Climatic stress
BG-GS-ET-14, IEC 60947-5-3
Automatic reset function
Yes
Reset after disconnection of supply voltage
Yes
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated
Stop-Category
0

AES 1165-2196 Related Documents