AES 1112.1 110 VAC Schmersal Electronic Components

Product Details

• Current, Utilisation category DC12
  0.1 A
• Voltage, Utilisation category DC12
  24 VDC
• Switching capacity, maximum
  2 A
• EMC rating
  EMC-Directive
• Conduction resistance, maximum
  40 Ω
• Current, Utilisation category DC13
  2 A
• Switching capacity, minimum
  10 mA
• Current, Utilisation category AC-15
  3 A
• Pull-in delay at RESET, typically
  20 ms
• Voltage, Utilisation category DC13
  24 VDC
• Voltage, Utilisation category AC15
  230 VAC
• Drop-out delay in case of emergency, typically
  20 ms
• Drop-out delay in case of power failure, typically
  80 ms
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Contact resistance, maximum
  0.1 Ω
• Note (Contact resistance)
  in new state
• Electrical power consumption
  2.4 W
• Rated control voltage at AC 60 Hz, maximum
  121 VAC
• Rated AC voltage for controls, 60 Hz, minimum
  93.5 VAC
• Rated control voltage at AC 50 Hz, maximum
  121 VAC
Rated AC voltage for controls, 50 Hz, minimum
93.5 VAC
Overvoltage category
III
Frequency range
50 Hz, 60 Hz
Rated operating voltage
110 VAC
Thermal test current
4 A
Degree of pollution to IEC/EN 60664-1
2
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated impulse withstand voltage Uimp
4 kV
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+70 °C
Ambient temperature, maximum
+55 °C
Degree of protection of the mounting space
IP54
Degree of protection of clips or terminals
IP20
Width
22.5 mm
Degree of protection of the enclosure
IP40
Height
75 mm
Ambient temperature, minimum
+0 °C
Depth
110 mm
Number of safety contacts
1
Cable section, maximum
2.5 mm²
Tightening torque of Clips
0.6 Nm
Terminal designations
IEC/EN 60947-1
Integral System Diagnostics, status
Yes
Terminal Connector
Screw connection, rigid or flexible
Number of openers
2
Number of shutters
1
Number of LEDs
1
Mechanical life, minimum
10,000,000 Operations
Mounting
Snaps onto standard DIN rail to EN 60715
Gross weight
160 g
Stop-Category
0
Reset after disconnection of supply voltage
Yes
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Wire breakage detection
Yes
Automatic reset function
Yes
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Material of the contacts, electrical
AgCdO
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14

AES 1112.1 110 VAC Related Documents