AES 1175 Schmersal Electronic Components

Product Details

• Current, Utilisation category DC12
  0.1 A
• EMC rating
  EMC-Directive
• Conduction resistance, maximum
  40 Ω
• Input signal, LOW Signal 0
  0 … 2 VDC
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Voltage, Utilisation category DC12
  24 VDC
• Switching capacity, maximum
  2 A
• Switching capacity, minimum
  10 VDC
• Terminal Connector
  Screw connection, rigid or flexible
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Number of safety contacts
  1
• Mechanical life, minimum
  20,000,000 Operations
• Number of LEDs
  1
• Reset after disconnection of supply voltage
  Yes
• Integral System Diagnostics, status
  Yes
• Automatic reset function
  Yes
• Earth connection detection
  Yes
• Standards
  IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Material of the contacts, electrical
  Ag-Ni 10 and 0.2 µm gold-plated
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Feedback circuit
Yes
Wire breakage detection
Yes
Short-circuit recognition
Yes
Gross weight
155 g
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category DC13
6 A
Current, Utilisation category AC-15
6 A
Voltage, Utilisation category AC15
230 VAC
Pull-in delay at RESET, typically
20 ms
Note (Contact resistance)
in new state
Drop-out delay in case of emergency, typically
20 ms
Drop-out delay in case of power failure, typically
80 ms
Pull-in delay at automatic start, maximum, typically
100 ms
Electrical power consumption
5 W
Contact resistance, maximum
0.1 Ω
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Rated control voltage at DC, maximum
28.8 VDC
Rated AC voltage for controls at DC minimum
20.4 VDC
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Degree of pollution to IEC/EN 60664-1
2
Thermal test current
6 A
Overvoltage category
III
Frequency range
50 Hz, 60 Hz
Rated impulse withstand voltage Uimp
4 kV
Storage and transport temperature, minimum
-25 °C
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Storage and transport temperature, maximum
+70 °C
Restistance to shock
30 g / 11 ms
Ambient temperature, maximum
+55 °C
Degree of protection of clips or terminals
IP20
Degree of protection of the mounting space
IP54
Degree of protection of the enclosure
IP40
Ambient temperature, minimum
+0 °C
Depth
121 mm
Tightening torque of Clips
0.6 Nm
Cable section, maximum
2.5 mm²
Width
22.5 mm
Number of openers
1
Cable section, minimum
0.25 mm²
Height
100 mm
Terminal designations
IEC/EN 60947-1
Number of shutters
1
Stop-Category
0

AES 1175 Related Documents