AES 1102 24 VDC Schmersal Electronic Components

Product Details

• EMC rating
  EMC-Directive
• Switching capacity, maximum
  2 A
• Current, Utilisation category AC-15
  1.5 A
• Current, Utilisation category DC12
  0.1 A
• Voltage, Utilisation category DC12
  24 VDC
• Conduction resistance, maximum
  40 Ω
• Switching capacity, minimum
  10 mA
• Current, Utilisation category DC13
  1 A
• Voltage, Utilisation category DC13
  24 VDC
• Pull-in delay at RESET, typically
  20 ms
• Voltage, Utilisation category AC15
  250 VAC
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Drop-out delay in case of power failure, typically
  80 ms
• Drop-out delay in case of emergency, typically
  20 ms
• Note (Contact resistance)
  in new state
• Electrical power consumption
  2.4 W
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Contact resistance, maximum
  0.1 Ω
• Rated control voltage at DC, maximum
  27.6 VDC
• Rated operating voltage
  24 VDC ± 15 %
Frequency range
50 Hz, 60 Hz
Thermal test current
4 A
Degree of pollution to IEC/EN 60664-1
2
Overvoltage category
III
Rated impulse withstand voltage Uimp
4 kV
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Storage and transport temperature, maximum
+70 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+55 °C
Ambient temperature, minimum
+0 °C
Degree of protection of clips or terminals
IP20
Degree of protection of the enclosure
IP40
Degree of protection of the mounting space
IP54
Height
75 mm
Depth
110 mm
Terminal designations
IEC/EN 60947-1
Width
22.5 mm
Tightening torque of Clips
0.6 Nm
Cable section, maximum
2.5 mm²
Terminal Connector
Screw connection, rigid or flexible
Mounting
Snaps onto standard DIN rail to EN 60715
Mechanical life, minimum
3,000,000 Operations
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Stop-Category
0
Gross weight
120 g
Number of safety contacts
1
Number of shutters
2
Automatic reset function
Yes
Wire breakage detection
Yes
Number of openers
4
Material of the contacts, electrical
AgCdO
Reset after disconnection of supply voltage
Yes
Integral System Diagnostics, status
Yes
Number of LEDs
1
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14

AES 1102 24 VDC Related Documents