MZM 100 ST-AS REAP Schmersal Electronic Components

Product Details

• Operating current
  600 mA
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• AS-i Input module address
  0
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Parameter bits, P3
  Device error (fault detected)
• AS-i Parameter bits, P2
  Auxiliary voltage in
• AS-i Outputs, DO 3
  For the variable setting of the latching force
• AS-i Outputs, DO 2
  For the variable setting of the latching force
• AS-i Parameter bits, P0
  Actuator in
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Outputs, DO 1
  For the variable setting of the latching force
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i, ID-Code2
  0xE
• AS-i, ID-Code
  0xB
• AS-i, IO-Code
  0x7
• AS-i, ID-Code1
  0xF
• AS-i Profile
  S-7.B.F.E
AS-i Version
V 2.1
AS-i Specification
Safety-Slave
AS-i Current consumption, maximum
100 mA
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Operating voltage AS-i maximum
31.6 VDC
Degree of pollution to IEC/EN 60664-1
3
AS-i Operating voltage, minimum
26.5 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Protection rating
III
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Relative humidity, minimum
30 %
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
95 %
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+55 °C
Ambient temperature, minimum
-25 °C
Degree of protection
IP67 to EN 60529
Width of sensor
40 mm
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Height of sensor
179 mm
Length of sensor
40 mm
Latching force, minimum
30 N
Latching force, maximum
100 N
Clamping force, typically
750 N
Mechanical life, minimum
1,000,000 Operations
Note (Mechanical lifetime)
Actuating speed < 0.5 m/s, Operations for door weights ≤ 5 kg
Clamping force, guaranteed
500 N
Standards
EN 62026-2, EN 60947-5-3, EN ISO 13849-1
Enclosure material
Glass-fibre, reinforced thermoplastic
Integral System Diagnostics, status
Yes
Gross weight
602 g
Latching
Yes
Safety functions
Yes
Guard locking monitored
Yes
general information
Universal coding
Power to lock
Yes
Time to readiness, maximum
4,000 ms
Coding level according to ISO 14119
Low
Active principle
inductive
Duration of risk, maximum
150 ms
Reaction time, maximum
150 ms

MZM 100 ST-AS REAP Related Documents