MZM 100 ST-AS AP Schmersal Electronic Components

Product Details

• Operating current
  600 mA
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Parameter bits, P3
  Device error (fault detected)
• AS-i Input module address
  0
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• AS-i Parameter bits, P2
  Auxiliary voltage in
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Parameter bits, P0
  Actuator in
• AS-i Outputs, DO 3
  No Function
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Outputs, DO 2
  No Function
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Outputs, DO 1
  No Function
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i, ID-Code1
  0xF
• AS-i, ID-Code2
  0xE
• AS-i, IO-Code
  0x7
• AS-i, ID-Code
  0xB
• AS-i Current consumption, maximum
  100 mA
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Profile
S-7.B.F.E
AS-i Specification
Safety-Slave
AS-i Version
V 2.1
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Operating voltage, minimum
26.5 VDC
Overvoltage category
III
Degree of pollution to IEC/EN 60664-1
3
Rated insulation voltage Ui
32 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Protection rating
III
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
95 %
Ambient temperature, minimum
-25 °C
Relative humidity, minimum
30 %
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+55 °C
Degree of protection
IP67 to EN 60529
Height of sensor
179 mm
Width of sensor
40 mm
Guard locking monitored
Yes
Length of sensor
40 mm
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Safety functions
Yes
Integral System Diagnostics, status
Yes
Clamping force, typically
750 N
Clamping force, guaranteed
500 N
Mechanical life, minimum
1,000,000 Operations
Note (Mechanical lifetime)
Actuating speed < 0.5 m/s, Operations for door weights ≤ 5 kg
Power to lock
Yes
Standards
EN 62026-2, EN 60947-5-3, EN ISO 13849-1
Active principle
inductive
Enclosure material
Glass-fibre, reinforced thermoplastic
Coding level according to ISO 14119
Low
Duration of risk, maximum
150 ms
general information
Universal coding
Gross weight
600 g
Reaction time, maximum
150 ms
Time to readiness, maximum
4,000 ms

MZM 100 ST-AS AP Related Documents