AZM300Z-I2-ST-1P2P-A Schmersal Safety Switches

Product Details

• Voltage drop Ud, maximum
  4 V
• Test pulse interval, typical
  1000 ms
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse duration, maximum
  0.5 ms
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Test pulse interval, minimum
  100 ms
• Duty cycle solenoid
  100 %
• Current consumption at 24V
  5 mA
• Switching frequency, maximum
  0.5 Hz
• External wiring and device fuse rating
  2 A gG
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Current consumption with solenoid ON, average
  200 mA
Operating voltage, maximum
26.4 VDC
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, minimum
20.4 VDC
Degree of pollution to IEC/EN 60664-1
3
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Storage and transport temperature, maximum
+90 °C
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Protection rating
III
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Relative humidity, maximum
93 %
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, minimum
-10 °C
Ambient temperature, maximum
+60 °C
Height of sensor
35 mm
Ambient temperature, minimum
+0 °C
Width of sensor
87.5 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor
120 mm
Length of sensor chain, maximum
200 m
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance ON Sao
1 mm
Switch distance
2 mm
Ensured switch distance OFF Sar
20 mm
Type of the fixing screws
2x M6
Tightening torque of the fixing screws, minimum
6 Nm
Tightening torque for the fixing screws, maximum
7 Nm
Latching force, adjustable, position 2
50 N
Clamping force, maximum Fmax
1,500 N
Angular offset between interlocking device and actuator, maximum
2 °
Clamping force in accordance with ISO14119 Fzh
1,150 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Latching force, adjustable, position 1
25 N
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Number of fail-safe digital outputs
2
Series-wiring
Yes
Short-circuit recognition
Yes
Safety functions
Yes
Short circuit detection
Yes
Latching
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Manual release
Yes
Guard locking monitored
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Power to lock
Yes
Duration of risk, maximum
200 ms
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Frequency band RFID
125 kHz
general information
Individual coding, multiple teaching
Gross weight
550 g
Transmit power, maximum
-6 dB/m
Active principle
RFID
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Time to readiness, maximum
5,000 ms
Coding level according to ISO 14119
High

AZM300Z-I2-ST-1P2P-A Related Documents