AZM300Z-I1-ST-1P2P-A-T Schmersal Safety Switch Interlocks

Product Details

• Test pulse interval, typical
  1000 ms
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Voltage drop Ud, maximum
  4 V
• Voltage, Utilisation category DC12
  24 VDC
• Current leakage Ir
  0.5 mA
• Versions
  short-circuit proof, p-type
• Test pulse interval, minimum
  100 ms
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse duration, maximum
  0.5 ms
• Current consumption at 24V
  5 mA
• Duty cycle solenoid
  100 %
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Switching frequency, maximum
  0.5 Hz
• External wiring and device fuse rating
  2 A gG
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Current consumption with solenoid ON, average
  200 mA
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, minimum
20.4 VDC
Operating voltage, maximum
26.4 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to IEC/EN 60664-1
3
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Rated insulation voltage Ui
32 VDC
Note (Relative humidity)
non-condensing, non-icing
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Relative humidity, maximum
93 %
Storage and transport temperature, maximum
+90 °C
Storage and transport temperature, minimum
-10 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Ambient temperature, maximum
+60 °C
Length of sensor
146 mm
Height of sensor
55 mm
Ambient temperature, minimum
+0 °C
Width of sensor
87.5 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Length of sensor chain, maximum
200 m
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance ON Sao
1 mm
Ensured switch distance OFF Sar
20 mm
Switch distance
2 mm
Tightening torque of the fixing screws, minimum
6 Nm
Clamping force, maximum Fmax
1,500 N
Type of the fixing screws
2x M6
Latching force, adjustable, position 1
25 N
Tightening torque for the fixing screws, maximum
7 Nm
Latching force, adjustable, position 2
50 N
Angular offset between interlocking device and actuator, maximum
2 °
Clamping force in accordance with ISO14119 Fzh
1,150 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Number of fail-safe digital outputs
2
Short-circuit recognition
Yes
Mechanical life, minimum
1,000,000 Operations
Safety functions
Yes
Series-wiring
Yes
Integral System Diagnostics, status
Yes
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
general information
Individual coding
Short circuit detection
Yes
Active principle
RFID
Guard locking monitored
Yes
Emergency exit
Yes
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-3
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Latching
Yes
Power to lock
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Time to readiness, maximum
5,000 ms
Frequency band RFID
125 kHz
Coding level according to ISO 14119
High
Gross weight
639.5 g
Duration of risk, maximum
200 ms
Transmit power, maximum
-6 dB/m

Related documents AZM300Z-I1-ST-1P2P-A-T Specs