AZM300B-I2-ST-SD2P Schmersal Safety Switches

Product Details

• Wiring capacity
  50 nF
• Current, Utilisation category DC13
  0.05 A
• Classification ZVEI CB24I, Sink
  C1, C2
• Voltage, Utilisation category DC12
  24 VDC
• Operation current
  150 mA
• Voltage, Utilisation category DC13
  24 VDC
• Test pulse interval, typical
  1000 ms
• Voltage drop Ud, maximum
  4 V
• Current leakage Ir
  0.5 mA
• Current, Utilisation category DC12
  0.05 A
• Versions
  short-circuit proof, p-type
• Test pulse duration, maximum
  0.5 ms
• Current consumption at 24V
  5 mA
• Switching frequency, maximum
  0.5 Hz
• Test pulse interval, minimum
  100 ms
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Classification ZVEI CB24I, Source
  C2
• Duty cycle solenoid
  100 %
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
No-load supply current I0
100 mA
External wiring and device fuse rating
2 A gG
Current consumption with solenoid ON, average
200 mA
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, maximum
26.4 VDC
Overvoltage category
III
Degree of pollution to IEC/EN 60664-1
3
Rated impulse withstand voltage Uimp
0.8 kV
Operating voltage, minimum
20.4 VDC
Protection rating
III
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Ambient temperature, minimum
+0 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Relative humidity, maximum
93 %
Height of sensor
35 mm
Storage and transport temperature, minimum
-10 °C
Width of sensor
87.5 mm
Length of sensor
120 mm
Storage and transport temperature, maximum
+90 °C
Ambient temperature, maximum
+60 °C
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Length of sensor chain, maximum
200 m
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance OFF Sar
20 mm
Switch distance
2 mm
Tightening torque for the fixing screws, maximum
7 Nm
Tightening torque of the fixing screws, minimum
6 Nm
Ensured switch distance ON Sao
1 mm
Type of the fixing screws
2x M6
Latching force, adjustable, position 2
50 N
Clamping force, maximum Fmax
1,500 N
Latching force, adjustable, position 1
25 N
Transmit power, maximum
-6 dB/m
Time to readiness, maximum
5,000 ms
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Clamping force in accordance with ISO14119 Fzh
1,150 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
general information
Individual coding, multiple teaching
Angular offset between interlocking device and actuator, maximum
2 °
Mechanical life, minimum
1,000,000 Operations
Number of fail-safe digital outputs
2
Integral System Diagnostics, status
Yes
Series-wiring
Yes
Safety functions
Yes
Latching
Yes
Short-circuit recognition
Yes
Power to unlock
Yes
Active principle
RFID
Short circuit detection
Yes
Manual release
Yes
Serial diagnostics
Yes
Actuator monitored
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Gross weight
550 g
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Duration of risk, maximum
200 ms
Frequency band RFID
125 kHz
Coding level according to ISO 14119
High

AZM300B-I2-ST-SD2P Related Documents