AZM201Z-SK-T-1P2PW-A Schmersal Safety Switches

Product Details

• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current leakage Ir
  0.5 mA
• Voltage drop Ud, maximum
  4 V
• Rated operating current (safety outputs)
  250 mA
• Classification ZVEI CB24I, Source
  C2
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Switching frequency, approx.
  1 Hz
• Classification ZVEI CB24I, Sink
  C1, C2
• Current consumption with solenoid ON, peak
  700 mA / 100 ms
• Operating current
  50 mA
• Current consumption with solenoid ON, average
  200 mA
• Operating voltage, minimum
  20.4 VDC
• Operating voltage, maximum
  26.4 VDC
• Degree of pollution to VDE 0100
  3
• Overvoltage category
  III
• No-load supply current I0
  50 mA
• Rated impulse withstand voltage Uimp
  0.8 kV
• Rated insulation voltage Ui
  32 VDC
• Restistance to shock
  30 g / 11 ms
Protection rating
III
Relative humidity, maximum
95 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing
Relative humidity, minimum
30 %
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
-25 °C
Length of sensor
50 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Height of sensor
220 mm
Width of sensor
40 mm
Cable section, maximum
1.5 mm²
Wire cross-section, maximum
15 AWG
Wire cross-section, minimum
23 AWG
Cable section, minimum
0.25 mm²
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Actuating speed, maximum
0.2 m/s
Clamping force, maximum Fmax
2,600 N
Mechanical life, minimum
1,000,000 Operations
Terminal Connector
Screw connection
Clamping force in accordance with ISO14119 Fzh
2,000 N
Latching force
30 N
Number of safety contacts
2
Series-wiring
Yes
Safety functions
Yes
Short-circuit recognition
Yes
Duration of risk, maximum
200 ms
Integral System Diagnostics, status
Yes
Coding level according to ISO 14119
Low
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Short circuit detection
Yes
Active principle
RFID
Time to readiness, maximum
4,000 ms
Manual release
Yes
Guard locking monitored
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
general information
Universal coding
Power to lock
Yes
Gross weight
584.3 g
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms
Enclosure material
Glass-fibre, reinforced thermoplastic

Related documents AZM201Z-SK-T-1P2PW-A Specs