AZM201BZ-I2-ST-T-AS-A-P Schmersal Safety Switch Interlocks

Product Details

• AS-i Input module address
  0
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Parameter bits, P3
  Internal device error (FID)
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Operating current
  500 mA
• Note (AS-i Parameter bits)
  FID: periphery error
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• AS-i Parameter bits, P0
  Safety guard and actuator detected
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Outputs, DO 2
  No Function
• AS-i Outputs, DO 3
  No Function
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Outputs, DO 1
  No Function
• AS-i, ID-Code2
  0xE
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i, ID-Code1
  0xF
• AS-i, ID-Code
  0xB
• AS-i, IO-Code
  0x7
• AS-i Version
  V 3.0
AS-i Specification
Safety-Slave
AS-i Profile
S-7.B.F.E
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Current consumption, maximum
100 mA
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Operating voltage, minimum
26.5 VDC
Switching frequency, maximum
1 Hz
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to IEC/EN 60664-1
3
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Rated insulation voltage Ui
32 VDC
Overvoltage category
III
Note (Relative humidity)
non-condensing, non-icing
Protection rating
III
Restistance to shock
30 g / 11 ms
Relative humidity, maximum
95 %
Relative humidity, minimum
10 %
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+60 °C
Width of sensor
40 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Ambient temperature, minimum
-25 °C
Height of sensor
220 mm
Length of sensor
50 mm
Tightening torque for the fixing screws, maximum
8 Nm
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Clamping force, maximum Fmax
2,600 N
Actuating speed, maximum
0.2 m/s
Number of actuating directions
2
Mechanical life, minimum
1,000,000 Operations
Latching force
30 N
Clamping force in accordance with ISO14119 Fzh
2,000 N
Latching
Yes
Integral System Diagnostics, status
Yes
Safety functions
Yes
Duration of risk, maximum
200 ms
Actuator and interlock combined monitored
Yes
Power to lock
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Time to readiness, maximum
4,000 ms
Coding level according to ISO 14119
High
Manual release
Yes
general information
Individual coding, multiple teaching
Reaction time, maximum
100 ms
Active principle
RFID
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3
Gross weight
538.1 g

AZM201BZ-I2-ST-T-AS-A-P Related Documents