7000-08041-2302500 Murr Elektronik Cable Assemblies

Product Details

• Weight
  591 g
• Series
  Connector Systems
• Acceleration (C-track)
  max. 10 m/s²
• Cable length
  25 m
• Product article number of manufacturer
  7000-08041-2302500
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Torsion speed
  35 cycles/min
• Travel speed (C-track)
  max. 3 m/s
• Temperature range (fixed)
  -40...+80 °C
• Bend radius (fixed)
  5× outer Ø
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Bend radius (moving)
  10× outer Ø
• Shore hardness (jacket)
  90 ±5 A
• Current load capacity
  to DIN VDE 0298-4
• Torsion stress
  ±180°/m
• Temperature range (mobile)
  -25...+80 °C
• Nominal voltage
  300 V AC
• Test voltage
  2500 V AC
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Jacket Color
  gray
chemical resistance
good resistance to oil, gasoline and chemicals (EN 60811-404)
Color (jacket)
gray
Outer-Ø (jacket)
4.1 mm ±5%
Material (jacket)
PUR
Color/numbering of wires
br, bk, bl
Stranding combination
3 wires twisted
Shield
no
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Wire-Ø incl. isolation
1.25 mm ±5%
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Material (wire)
Cu wire, bare
Shore hardness (wire isolation)
70 ±5 D
AWG
similar to AWG 24
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Construction (core)
32× 0.1 mm (multi-strand wire class 6)
Material (wire isolation)
PP
Diameter (core)
3× 0.25 mm²
Resistor (core)
max. 79 Ω/km (20 °C)
Single wire Ø (core)
0.1 mm
Cable weight [g/m]
26,4 g
Cable Type
3 (PUR)
Cable identification
230
No./diameter of wires
3× 0.25 mm²
C-track properties
10 Mio.
Wire isolation
PP (br, bl, bk)
Outer Ø
4.1 mm ±5%
Pollution Degree
3
Stripping length (jacket)
20 mm
Temperature range
-25...+85 °C, depending on cable quality
Material (gasket)
FKM
Material (contact surface)
Au
Standards
DIN EN 61076-2-104 (M8)
Compression gland
M8 (SW9)
Material (contact)
Copper alloy
Protection
IP65, IP66K, IP67 inserted and tightened (EN 60529)
suitable for corrugated tube (internal Ø)
6.5 mm
Mounting method
inserted, tightened
Material
PUR
Locking material
Zinc die casting, matte nickel plated
Rated surge voltage
1.5 kV
Operating voltage
max. 50 V AC/60 V DC
Material group
IEC 60664-1, category I
Operating current per contact
max. 4 A
LED display
no
Form
08041
Locking of ports
Screw thread (M8×1 mm) recommended torque 0.4 Nm, self-securing
No. of poles
3
Operating voltage (only UL listed)
max. 30 V AC/DC

7000-08041-2302500 Related Documents