SRB-E-402ST Schmersal Safety Controllers

SRB-E-402ST on Applied Automation
Schmersal

Part#:SRB-E-402ST

Manufacturer:Schmersal

Alt. Part#:103007221

Product Lifecycle:Active

Get a quick Quote!

SRB-E-402ST Schmersal - Safety-monitoring modules; Combination (double evaluation); Two-functions safety monitoring module (double evaluation), 2 x STOP 0; 2 x 1 oder 2-channel control; 2 x Start button / Auto-start; 1 x Monitoring two-hand control panels to ISO 13851; 2 safety

About the manufacturer: Schmersal is one of the manufacturers that offers Safety Controllers that you can order at Applied Automation site. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Check out the SRB-E-402ST Schmersal price in the box on the right side or send a quick quote.

Product Details

  • Switching capacity, maximum
    1 A
  • Current, Utilisation category DC12
    0.1 A
  • Note (Contact resistance)
    in new state
  • Rated insulation voltage Ui
    250 V / 50 V
  • Restistance to shock
    30 g / 11 ms
  • EMC rating
    EMC-Directive
  • Conduction resistance, maximum
    40 Ω
  • Switching capacity, minimum
    10 mA
  • Current, Utilisation category AC-15
    4 A
  • Voltage, Utilisation category DC13
    24 VDC
  • Voltage, Utilisation category AC15
    230 VAC
  • Current, Utilisation category DC13
    4 A
  • Current leakage Ir
    1 mA
  • Voltage, Utilisation category DC12
    24 VDC
  • Voltage drop Ud, maximum
    0.5 V
  • Switching frequency, maximum
    0.3 Hz
  • Pull-in delay at RESET, typically
    150 ms
  • Drop-out delay in case of power failure, typically
    10 ms
  • Electrical power consumption
    3.6 W
  • Pull-in delay at automatic start, maximum, typically
    150 ms
  • Drop-out delay in case of emergency, typically
    10 ms
  • Contact resistance, maximum
    0.1 Ω
  • Operating current
    150 mA
  • Rated control voltage at DC, maximum
    28.8 VDC
  • Degree of pollution to IEC/EN 60664-1
    2
  • Rated operating voltage
    24 VDC -20%/+20%, residual ripple max. 10%
  • Rated AC voltage for controls at DC minimum
    19.2 VDC
  • Overvoltage category
    III
  • Rated impulse withstand voltage, semiconductor output Uimp
    0.8 kV
  • Rated impulse withstand voltage, relay output Uimp
    4 kV
  • Ambient temperature, maximum
    +60 °C
  • Resistance to vibrations to EN 60068-2-6
    10 ... 55 Hz, Amplitude 0.35 mm
  • Storage and transport temperature, maximum
    +85 °C
  • Storage and transport temperature, minimum
    -40 °C
  • Ambient temperature, minimum
    -25 °C
  • Degree of protection of clips or terminals
    IP20
  • Degree of protection of the enclosure
    IP40
  • Degree of protection of the mounting space
    IP54
  • Depth
    115 mm
  • Height
    98 mm
  • Width
    22.5 mm
  • Tightening torque of Clips
    0.5 Nm
  • Cable section, minimum
    0.25 mm²
  • Cable section, maximum
    2.5 mm²
  • Terminal designations
    IEC/EN 60947-1
  • Mounting
    Snaps onto standard DIN rail to EN 60715
  • Terminal Connector
    Screw connection, plug-in, rigid or flexible
  • Mechanical life, minimum
    10,000,000 Operations
  • Number of Signalling outputs, STOP 0
    1
  • Number of fail-safe outputs, Stop 0
    2
  • Number of shutters
    2
  • Number of Safety contacts, STOP 0
    2
  • Number of openers
    4
  • Number of auxiliary contacts
    1
  • Number of LEDs
    6
  • Earth connection detection
    Yes
  • Integral System Diagnostics, status
    Yes
  • Automatic reset function
    Yes
  • Reset edge detection
    Yes
  • Feedback circuit
    Yes
  • Enclosure material
    Glass-fibre reinforced thermoplastic, ventilated
  • Start input
    Yes
  • Climatic stress
    EN 60068-2-78
  • Material of the contacts, electrical
    Ag-Ni, self-cleaning, positive drive
  • Standards
    EN ISO 13849-1, EN 60947-5-1, EN 60204-1
  • Short-circuit recognition
    Yes
  • Electronic Fuse
    Yes
  • Wire breakage detection
    Yes
  • Stop-Category
    0
  • Gross weight
    190 g

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


SRB-E-402ST Description

SRB-E-402ST Schmersal - Safety-monitoring modules; Combination (double evaluation); Two-functions safety monitoring module (double evaluation), 2 x STOP 0; 2 x 1 oder 2-channel control; 2 x Start button / Auto-start; 1 x Monitoring two-hand control panels to ISO 13851; 2 safety



Related documents SRB-E-402ST Specs

Manufacturer warranty

$465.00

Request a quote, and we will send availability within minutes.

Select Qty:

$465.00

$465.00 each

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international


Secure Payment Processing

with money back guarantee


Warranty

Manufacturer warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts