SLC440AS-ER-1050-30 Schmersal Safety Light Curtains

Product Details

• Power consumption, Receiver
  150 mA
• Power consumption, Transmitter
  75 mA
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• AS-i Input module address
  0
• AS-i Parameter bits, P2
  No function
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• AS-i Parameter bits, P0
  No function
• AS-i Parameter bits, P3
  Internal device error (FID)
• AS-i Outputs, DO 0 … DO 3
  No Function
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Parameter bits, P1
  Low beam quality
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Profile
  S-0.B.F.E
• AS-i Specification
  Safety-Slave
• AS-i Version
  V 3.0
• AS-i Current consumption, maximum
  50 mA
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• Degree of pollution to VDE 0100
  2
AS-i Operating voltage, minimum
18 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Restistance to shock
10 g / 16 ms
Rated insulation voltage Ui
32 VDC
Storage and transport temperature, maximum
+70 °C
Protection rating
III
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+50 °C
Ambient temperature, minimum
-10 °C
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 0.35 mm
Degree of protection
IP67 to EN 60529
Length of sensor
33 mm
Width of sensor
27.8 mm
Height of transmitter
1,163 mm
Height of Receiver
1,183 mm
Terminal connector, Recipient
Connector plug M12, 5-pole
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Terminal Connector
Connector
Wave length of the sensor
880 nm
Range, protection field, maximum
10,000 mm
Range, protection field, minimum
300 mm
Height of the protection field
1,050 mm
Detection ability for test bodies at v = 1.6 m/s
30 mm
Number of beams
52
Enclosure material
Aluminium
Standards
EN 50295, EN 62061, EN 61496-1
Integral System Diagnostics, status
Yes
Reaction time, maximum
23 ms
Hide function
Yes
Gross weight
1,830 g
7-segment display
Yes
Active principle
optoelectronic
Safety functions
Yes

Related documents SLC440AS-ER-1050-30 Specs