SLC440AS-ER-0810-14 Schmersal Safety Light Curtains

Product Details

• Power consumption, Transmitter
  75 mA
• Power consumption, Receiver
  150 mA
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• AS-i Input module address
  0
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• AS-i Parameter bits, P3
  Internal device error (FID)
• AS-i Parameter bits, P2
  No function
• AS-i Parameter bits, P1
  Low beam quality
• AS-i Parameter bits, P0
  No function
• AS-i Outputs, DO 0 … DO 3
  No Function
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Profile
  S-0.B.F.E
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Version
  V 3.0
• AS-i Specification
  Safety-Slave
• AS-i Current consumption, maximum
  50 mA
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Operating voltage, minimum
  18 VDC
• Degree of pollution to VDE 0100
  2
AS-i Operating voltage AS-i maximum
31.6 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Overvoltage category
III
Protection rating
III
Restistance to shock
10 g / 16 ms
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 0.35 mm
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+70 °C
Ambient temperature, maximum
+50 °C
Height of the Sensor (Transmitter)
923 mm
Ambient temperature, minimum
-10 °C
Degree of protection
IP67 to EN 60529
Width of sensor
27.8 mm
Length of sensor
33 mm
Terminal connector, Recipient
Connector plug M12, 5-pole
Wave length of the sensor
880 nm
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Height of Receiver
943 mm
Terminal Connector
Connector
Range, protection field, maximum
7,000 mm
Range, protection field, minimum
300 mm
Height of the protection field
810 mm
Detection ability for test bodies at v = 1.6 m/s
14 mm
Number of beams
80
Standards
EN 50295, EN 62061, EN 61496-1
Integral System Diagnostics, status
Yes
7-segment display
Yes
Active principle
optoelectronic
Enclosure material
Aluminium
Gross weight
1,530 g
Safety functions
Yes
Hide function
Yes
Reaction time, maximum
23 ms

Related documents SLC440AS-ER-0810-14 Specs