RSS260-D-ST Schmersal Safety Switches

Product Details

• EMC rating
  IEC 60947-3
• Interfering radiation
  IEC 61000-6-4
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Current leakage Ir
  0.5 mA
• Switching frequency, approx.
  1 Hz
• Operating current
  600 mA
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Rated operating voltage, maximum
  26.4 VDC
• Rated operating voltage, minimum
  20.4 VDC
• No-load supply current I0
  100 mA
• Degree of pollution to VDE 0100
  3
• Rated insulation voltage Ui
  32 VDC
• Rated impulse withstand voltage Uimp
  0.8 kV
• Overvoltage category
  III
• Restistance to shock
  30 g / 11 ms
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Storage and transport temperature, minimum
  -25 °C
Ambient temperature, minimum
-25 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Height of sensor
18 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Ensured switching distance ON, side
6 mm
Mounting
A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
Versions
p-type
Voltage drop Ud, maximum
2 V
Voltage type
DC (direct current)
Rated operating voltage
24 VDC -15% / +10%
Ambient temperature, maximum
+65 °C
Storage and transport temperature, maximum
+85 °C
Width of sensor
39.2 mm
Length of sensor
29.5 mm
Ensured switch distance OFF Sar, lateral
15 mm
Ensured switching distance OFF, front
18 mm
Ensured switching distance ON, front
10 mm
Terminal Connector
Connector M8
Switch distance Sn
front 12 mm, lateral 9 mm
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum 100 mm cl
Repeat accuracy R R
0.5 mm
Number of semi-conductor outputs with signaling function
1
Number of fail-safe digital outputs
2
Hysteresis (Switch distance), maximum
2 mm
Actuating panels
lateral, front side
Integral System Diagnostics, status
Yes
Number of LEDs
3
Cascadable
Yes
Short-circuit recognition
Yes
Safety functions
Yes
Time to readiness, maximum
2,000 ms
Duration of risk, maximum
200 ms
Diagnostic output
Yes
Short circuit detection
Yes
Reaction time, maximum
100 ms
Enclosure material
Plastic, thermoplastic, self-extinguishing
general information
Universal coding
Sensor topology
Sensor for series wiring
Installation conditions (mechanical)
not flush
Active area
lateral, front
Standards
IEC 60947-5-3
Coding level according to ISO 14119
Low
Housing construction form
Block
Gross weight
47.4 g
Active principle
RFID

Related documents RSS260-D-ST Specs