MV8H 015-11Y Schmersal Electronic Components

Product Details

• Thermal test current
  10 A
• Width of Castor
  8.5 mm
• Bounce duration, maximum
  2.5 ms
• Switchover time, maximum
  40 ms
• Note (Switching element)
  galvanically separated contact bridges
• Switching element
  NO contact, NC contact
• Switching principle
  Snap switch element
• Rated insulation voltage Ui
  500 V
• Utilisation category AC-15
  400 VAC
• Ambient temperature, maximum
  +90 °C
• Ambient temperature, minimum
  -30 °C
• Degree of protection
  IP65 to EN 60529
• Diameter of Castor
  20 mm
• Height of sensor
  126 mm
• Length of sensor
  43 mm
• Width of sensor
  67 mm
• Wire cross-section
  13 AWG
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Cable section, maximum
  2.5 mm²
• Terminal Connector
  Screw connection
Actuating torque
0.2 Nm
Note (Actuating speed)
Actuating speed with vertical actuating angle to switch axis
Actuating speed, maximum
3 m/s
Mechanical life, minimum
10,000,000 Operations
Actuating angle, from right of switch axis
30 °
Contact opening
2 x 1.2 mm
Actuating speed, minimum
1 mm/min
Actuating element
Roller lever
Actuating angle, from left of switch axis
30 °
Number of switching stages
2
Number of shutters
1
Gross weight
341 g
Roller material
Plastic
Active principle
mechanical
Standards
EN 60947-5-1
Number of openers
1
Enclosure coating material
painted
Material of the contacts, electrical
Silver
Slide form
Castor
Enclosure material
Light-alloy diecast, paint finish

MV8H 015-11Y Related Documents