CSS 8-180-2P-Y-L Schmersal Electronic Components

Product Details

• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.5 A
• Current, Utilisation category DC12
  0.5 A
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  0.5 V
• Current leakage Ir
  0.5 mA
• Output current, (fail-safe output), maximum
  0.5 A
• Versions
  p-type
• Rated operating current (safety outputs)
  500 mA
• Rated operating voltage
  24 VDC
• Operating current
  1,000 mA
• Switching frequency, approx.
  3 Hz
• No-load supply current I0
  50 mA
• Operating voltage, maximum
  26.4 VDC
• Operating voltage, minimum
  20.4 VDC
• Voltage type
  DC (direct current)
• Degree of pollution to VDE 0100
  3
• Protection rating
  II
• Overvoltage category
  III
• Rated insulation voltage Ui
  32 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Ambient temperature, maximum
+60 °C
Storage and transport temperature, maximum
+85 °C
Ambient temperature, minimum
-25 °C
Storage and transport temperature, minimum
-25 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Length of sensor
92 mm
ISO thread of the sensor
M18
width across flats
24 BK
Terminal connector, Output
4-pole
Terminal connector, Input
4-pole
Ensured switch distance OFF Sar
10 mm
Tightening torque of nuts, maximum
3 Nm
Switch distance
8 mm
Ensured switch distance ON Sao
7 mm
Terminal Connector
Cable
Repeat accuracy R R
0.2 mm
Hysteresis (Switch distance), maximum
0.7 mm
Number of Series-wiring of sensors
16
Number of fail-safe digital outputs
2
Integral System Diagnostics, status
Yes
Cascadable
Yes
Short circuit detection
Yes
Safety functions
Yes
Short-circuit recognition
Yes
Duration of risk, maximum
30 ms
Reaction time, maximum
30 ms
Standards
IEC 61508, IEC 60947-5-3
Gross weight
167 g
Sensor topology
Sensor for series wiring
Enclosure material
Glass-fibre, reinforced thermoplastic
Housing construction form
Cylinder, thread
Active area
Glass-fibre, reinforced thermoplastic
Active principle
inductive
Installation conditions (mechanical)
not flush
Material of the nuts
Glass-fibre, reinforced thermoplastic

CSS 8-180-2P-Y-L Related Documents