AZM300Z-ST-1P2P-A Schmersal Safety Switches

Product Details

• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Operating voltage, minimum
  20.4 VDC
• Note (Relative humidity)
  non-condensing, non-icing
• Note (length of the sensor chain)
  Cable length and cross-section change the voltage drop dependiing on the output current
• Number of fail-safe digital outputs
  2
• Duration of risk, maximum
  200 ms
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 13849-1
• Current, Utilisation category DC13
  0.05 A
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Voltage, Utilisation category DC13
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Current leakage Ir
  0.5 mA
• Versions
  short-circuit proof, p-type
• Current consumption at 24V
  5 mA
• Classification ZVEI CB24I, Source
  C2
• Test pulse interval, minimum
  100 ms
• Test pulse duration, maximum
  0.5 ms
• Classification ZVEI CB24I, Sink
  C1, C2
• Duty cycle solenoid
  100 %
Switching frequency, maximum
0.5 Hz
Current consumption with solenoid ON, peak
350 mA / 200 ms
Current consumption with solenoid ON, average
200 mA
External wiring and device fuse rating
2 A gG
No-load supply current I0
100 mA
Degree of pollution to IEC/EN 60664-1
3
Notes (Power supply, general)
stabilised PELV power supply
Required rated short-circuit current to EN 60947-5-1
100 A
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Operating voltage, maximum
26.4 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Protection rating
III
Relative humidity, maximum
93 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Storage and transport temperature, maximum
+90 °C
Ambient temperature, maximum
+60 °C
Storage and transport temperature, minimum
-10 °C
Height of sensor
35 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Test pulse interval, typical
1000 ms
Ambient temperature, minimum
+0 °C
Ensured switch distance OFF Sar
20 mm
Length of sensor
120 mm
Length of sensor chain, maximum
200 m
Width of sensor
87.5 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Tightening torque of the fixing screws, minimum
6 Nm
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance ON Sao
1 mm
Switch distance
2 mm
Type of the fixing screws
2x M6
Clamping force, maximum Fmax
1,500 N
Latching force, adjustable, position 1
25 N
Tightening torque for the fixing screws, maximum
7 Nm
Mechanical life, minimum
1,000,000 Operations
Latching force, adjustable, position 2
50 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Integral System Diagnostics, status
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Safety functions
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Series-wiring
Yes
Power to lock
Yes
Short circuit detection
Yes
Manual release
Yes
Short-circuit recognition
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Latching
Yes
Guard locking monitored
Yes
Active principle
RFID
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight
550 g
Transmit power, maximum
-6 dB/m
general information
Universal coding
Time to readiness, maximum
5,000 ms
Coding level according to ISO 14119
Low
Frequency band RFID
125 kHz

Related documents AZM300Z-ST-1P2P-A Specs