AZM300Z-I2-ST-1P2P-T Schmersal Safety Switches

Product Details

• Test pulse interval, typical
  1000 ms
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Versions
  short-circuit proof, p-type
• Current, Utilisation category DC13
  0.05 A
• Voltage drop Ud, maximum
  4 V
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC12
  24 VDC
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse interval, minimum
  100 ms
• Test pulse duration, maximum
  0.5 ms
• Current consumption at 24V
  10 mA
• Duty cycle solenoid
  100 %
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Switching frequency, maximum
  0.5 Hz
• External wiring and device fuse rating
  2 A gG
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Current consumption with solenoid ON, average
  200 mA
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, minimum
20.4 VDC
Operating voltage, maximum
26.4 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to IEC/EN 60664-1
3
Rated insulation voltage Ui
32 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Restistance to shock
30 g / 11 ms
Protection rating
III
Relative humidity, maximum
93 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, maximum
+90 °C
Ambient temperature, maximum
+60 °C
Storage and transport temperature, minimum
-10 °C
Height of sensor
55 mm
Ambient temperature, minimum
+0 °C
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Length of sensor chain, maximum
200 m
Width of sensor
87.5 mm
Length of sensor
146 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance OFF Sar
20 mm
Switch distance
2 mm
Ensured switch distance ON Sao
1 mm
Tightening torque for the fixing screws, maximum
7 Nm
Tightening torque of the fixing screws, minimum
6 Nm
Type of the fixing screws
2x M6
Latching force, adjustable, position 2
50 N
Latching force, adjustable, position 1
25 N
Clamping force, maximum Fmax
1,500 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Clamping force in accordance with ISO14119 Fzh
1,150 N
Number of fail-safe digital outputs
2
Mechanical life, minimum
1,000,000 Operations
general information
Individual coding, multiple teaching
Integral System Diagnostics, status
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Safety functions
Yes
Guard locking monitored
Yes
Short-circuit recognition
Yes
Short circuit detection
Yes
Series-wiring
Yes
Latching
Yes
Active principle
RFID
Emergency exit
Yes
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Power to unlock
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Duration of risk, maximum
200 ms
Transmit power, maximum
-6 dB/m
Frequency band RFID
125 kHz
Coding level according to ISO 14119
High
Gross weight
639.6 g
Time to readiness, maximum
5,000 ms
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Related documents AZM300Z-I2-ST-1P2P-T Specs