AZM300B-ST-SD2P-A-T Schmersal Safety Switch Interlocks

Product Details

• Wiring capacity
  50 nF
• Current, Utilisation category DC12
  0.05 A
• Classification ZVEI CB24I, Source
  C2
• Current leakage Ir
  0.5 mA
• Test pulse interval, minimum
  100 ms
• Operation current
  150 mA
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Test pulse interval, typical
  1000 ms
• Voltage drop Ud, maximum
  4 V
• Voltage, Utilisation category DC12
  24 VDC
• Versions
  short-circuit proof, p-type
• Current consumption at 24V
  5 mA
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse duration, maximum
  0.5 ms
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Duty cycle solenoid
  100 %
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Switching frequency, maximum
  0.5 Hz
• External wiring and device fuse rating
  2 A gG
Current consumption with solenoid ON, peak
350 mA / 200 ms
Current consumption with solenoid ON, average
200 mA
Notes (Power supply, general)
stabilised PELV power supply
No-load supply current I0
100 mA
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Degree of pollution to IEC/EN 60664-1
3
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Restistance to shock
30 g / 11 ms
Note (Relative humidity)
non-condensing, non-icing
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Relative humidity, maximum
93 %
Storage and transport temperature, minimum
-10 °C
Storage and transport temperature, maximum
+90 °C
Height of sensor
55 mm
Ambient temperature, minimum
+0 °C
Ambient temperature, maximum
+60 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Width of sensor
87.5 mm
Length of sensor
146 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Terminal Connector
Connector M12, 8-pole, A-coded
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor chain, maximum
200 m
Ensured switch distance ON Sao
1 mm
Latching force, adjustable, position 1
25 N
Ensured switch distance OFF Sar
20 mm
Switch distance
2 mm
Clamping force in accordance with ISO14119 Fzh
1,150 N
Tightening torque for the fixing screws, maximum
7 Nm
Type of the fixing screws
2x M6
Clamping force, maximum Fmax
1,500 N
Latching force, adjustable, position 2
50 N
Tightening torque of the fixing screws, minimum
6 Nm
Angular offset between interlocking device and actuator, maximum
2 °
Integral System Diagnostics, status
Yes
Mechanical life, minimum
1,000,000 Operations
Safety functions
Yes
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Number of fail-safe digital outputs
2
Series-wiring
Yes
Short-circuit recognition
Yes
Emergency exit
Yes
Short circuit detection
Yes
Actuator monitored
Yes
Latching
Yes
Serial diagnostics
Yes
Power to lock
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Time to readiness, maximum
5,000 ms
Duration of risk, maximum
200 ms
general information
Universal coding
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-3
Coding level according to ISO 14119
Low
Gross weight
645 g
Active principle
RFID
Transmit power, maximum
-6 dB/m
Frequency band RFID
125 kHz

Related documents AZM300B-ST-SD2P-A-T Specs