AZM 200SK-T-1P2PWA Schmersal Safety Switch Interlocks

Product Details

• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Current leakage Ir
  0.5 mA
• Rated operating current (safety outputs)
  250 mA
• Operating current
  50 mA
• Switching thresholds
  -3 V … 5 V (Low), 15 V … 30 V (High)
• Voltage drop Ud, maximum
  4 V
• No-load supply current I0
  600 mA
• Operating voltage, maximum
  26.4 VDC
• Switching frequency, approx.
  1 Hz
• Degree of pollution to VDE 0100
  3
• Operating voltage, minimum
  20.4 VDC
• Overvoltage category
  III
• Rated insulation voltage Ui
  32 VDC
• Rated impulse withstand voltage Uimp
  0.8 kV
• Protection rating
  II
• Note (Relative humidity)
  non-condensing
• Restistance to shock
  30 g / 11 ms
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Relative humidity, maximum
  95 %
Storage and transport temperature, maximum
+85 °C
Relative humidity, minimum
30 %
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+50 °C
Ambient temperature, minimum
-25 °C
Width of sensor
40 mm
Degree of protection
IP67 to EN 60529
Height of sensor
220 mm
Length of sensor
50 mm
Wire cross-section, maximum
15 AWG
Wire cross-section, minimum
23 AWG
Cable section, minimum
0.25 mm²
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Cable section, maximum
1.5 mm²
Terminal Connector
Screw connection
Latching force
30 N
Actuating speed, maximum
0.2 m/s
Clamping force in accordance with ISO14119 Fzh
2,000 N
Mechanical life, minimum
1,000,000 Operations
Clamping force, maximum Fmax
2,600 N
Number of safety contacts
2
Safety functions
Yes
Manual release
Yes
Short circuit detection
Yes
Integral System Diagnostics, status
Yes
Series-wiring
Yes
Short-circuit recognition
Yes
Reaction time, maximum
60 ms
Duration of risk, maximum
120 ms
Enclosure material
Glass-fibre, reinforced thermoplastic
Time to readiness, maximum
4,000 ms
Active principle
inductive
Gross weight
557 g
Power to lock
Yes
Guard locking monitored
Yes
Standards
IEC 61508, EN 60947-5-1, EN ISO 13849-1

AZM 200SK-T-1P2PWA Related Documents