AZM 161 B ST1-AS RAP Schmersal Safety Switch Interlocks

Product Details

• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• AS-i Input module address
  0
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Parameter bits, P3
  Error message - locking/unlocking of the solenoid interlock blocked
• Operating current
  500 mA
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Parameter bits, P0
  Actuator detected
• AS-i Outputs, DO 1
  No Function
• AS-i Outputs, DO 3
  No Function
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Outputs, DO 2
  No Function
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i, ID-Code2
  0xE
• AS-i, ID-Code1
  0xF
• AS-i, ID-Code
  0xB
• AS-i, IO-Code
  0x7
• AS-i Current consumption, maximum
  100 mA
AS-i Version
V 2.1
AS-i Profile
S-7.B.F.E
AS-i Specification
Safety-Slave
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Operating voltage AS-i maximum
31.6 VDC
Switching frequency
1,000 /h
AS-i Operating voltage, minimum
26.5 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to VDE 0100
3
Rated insulation voltage Ui
32 VDC
Overvoltage category
III
Protection rating
II
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
95 %
Relative humidity, minimum
30 %
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Degree of protection
IP67 to EN 60529
Height of sensor
90 mm
Width of sensor
130 mm
Length of sensor
30 mm
Connector position
Bottom
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Clamping force
2,000 N
Latching force
30 N
Actuating speed, maximum
2 m/s
Mechanical life, minimum
1,000,000 Operations
Actuating play in direction of actuation
5.5 mm
Reaction time, maximum
100 ms
Manual release
Yes
Active principle
electromechanical
Actuator monitored
Yes
Integral System Diagnostics, status
Yes
Number of actuating directions
3
Gross weight
450 g
Standards
IEC 61508, EN 60947-5-1, EN 62026-2
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Power to lock
Yes

Related documents AZM 161 B ST1-AS RAP Specs