7000-19301-7061000 Murr Elektronik Cable Assemblies

Product Details

• Weight
  628 g
• Series
  Connector Systems
• Cable length
  10 m
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Product article number of manufacturer
  7000-19301-7061000
• Torsion speed
  35 cycles/min
• Torsion stress
  ±30°/m
• Acceleration (C-track)
  max. 5 m/s²
• Bend radius (moving)
  10× outer Ø
• Travel speed (C-track)
  max. 3.3 m/s
• No. of bending cycles (C-track)
  max. 5 Mio. (25 °C)
• Test voltage
  2000 V AC
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• Bend radius (fixed)
  5× outer Ø
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Current load capacity
  to DIN VDE 0298-4
• Nominal voltage
  300 V AC
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• Outer-Ø (jacket)
  6.5 mm ±5%
Shore hardness (jacket)
90 ±5 A
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Color (jacket)
black
Material (jacket)
PUR
Shield
yes
Shield (Type)
Copper braid
Stranding combination
Twisted wires rdbl, grpk and vi, over it all other wires are twisted
Color/numbering of wires
br, rd, gr, bk, ye, pk, gn, wh, bl, rdbl, grpk, vi
Wire-Ø incl. isolation
1.0 mm ±5%
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Shore hardness (wire isolation)
70 ±5 D
Material (wire isolation)
PP
Construction (core)
18× 0.1 mm (multi-strand wire class 6)
AWG
similar to AWG 26
Diameter (core)
12× 0.14 mm²
Resistor (core)
max. 138 Ω/km (20 °C)
Temperature range
-25...+85 °C, depending on cable quality
Single wire Ø (core)
0.1 mm
Pollution Degree
3
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Cable identification
706
Material (wire)
Cu wire, bare
Cable Type
3 (PUR)
Cable weight [g/m]
67,1 g
Mounting method
inserted, tightened
Compression gland
M12 (SW13)
Locking material
Zinc die casting, matte nickel plated
Standards
DIN EN 61076-2-101 (M12)
Rated surge voltage
0.8 kV
Operating current per contact
max. 1.5 A
Operating voltage (only UL listed)
30 V AC/DC
Form
19301
Operating voltage
max. 30 V AC/DC
Coding
A-Coded
Material group
IEC 60664-1, category I
Protection
IP65, IP66K, IP67 inserted and tightened (EN 60529)
Locking of ports
Screw thread (M12×1 mm) recommended torque 0.6 Nm, self-securing

Related documents 7000-19301-7061000 Specs