7000-12060-2360100 Murr Elektronik Cable Assemblies

Product Details

• Weight
  64 g
• Series
  Connector Systems
• Product article number of manufacturer
  7000-12060-2360100
• Torsion speed
  35 cycles/min
• Cable length
  1 m
• Acceleration (C-track)
  max. 10 m/s²
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Torsion stress
  ±180°/m
• Travel speed (C-track)
  max. 3 m/s
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• Current load capacity
  to DIN VDE 0298-4
• Test voltage
  2500 V AC
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Bend radius (moving)
  10× outer Ø
• Color (jacket)
  gray
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Bend radius (fixed)
  5× outer Ø
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• Nominal voltage
  300 V AC
Outer-Ø (jacket)
5.9 mm ±5%
Material (jacket)
PUR
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Shore hardness (jacket)
90 ±5 A
Stranding combination
3 wires twisted
Color/numbering of wires
bk numbered, gnye longitudinally striped
Shield
no
Cable identification
236
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Wire-Ø incl. isolation
1.85 mm ±5%
Resistor (core)
max. 26 Ω/km (20 °C)
Material (wire)
Cu wire, bare
Material (wire isolation)
PP
Single wire Ø (core)
0.15 mm
Shore hardness (wire isolation)
70 ±5 D
Diameter (core)
3× 0.75 mm²
AWG
similar to AWG 18
Construction (core)
42× 0.15 mm (multi-strand wire class 6)
Cable weight [g/m]
56,1 g
Compression gland
M12 (SW13)
Cable Type
3 (PUR)
Protection
IP65, IP66K, IP67
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Pollution Degree
3
Standards
DIN EN 61076-2-101 (M12)
Form
12060
Material
PUR
Temperature range
-25...+85 °C, depending on cable quality
Locking material
Zinc die casting, matte nickel plated
Material group
IEC 60664-1, category I
suitable for corrugated tube (internal Ø)
10 mm
Rated surge voltage
1.5 kV
Coding
A-coded
Operating voltage (only UL listed)
max. 30 V AC/DC
Operating current per contact
max. 4 A
Locking of ports
Screw thread (M12×1 mm) recommended torque 0.6 Nm, self-securing
Operating voltage
max. 125 V AC/DC

7000-12060-2360100 Related Documents