7000-10041-2361000 Murr Elektronik Cable Assemblies

Product Details

• Weight
  543 g
• Series
  Connector Systems
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Cable length
  10 m
• Torsion speed
  35 cycles/min
• Product article number of manufacturer
  7000-10041-2361000
• Torsion stress
  ±180°/m
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Test voltage
  2500 V AC
• Acceleration (C-track)
  max. 10 m/s²
• Bend radius (moving)
  10× outer Ø
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Travel speed (C-track)
  max. 3 m/s
• Bend radius (fixed)
  5× outer Ø
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• Current load capacity
  to DIN VDE 0298-4
• Color (jacket)
  gray
• Nominal voltage
  300 V AC
• Color/numbering of wires
  bk numbered, gnye longitudinally striped
Shield
no
chemical resistance
good resistance to oil, gasoline and chemicals (EN 60811-404)
Stranding combination
3 wires twisted
Material (jacket)
PUR
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Outer-Ø (jacket)
5.9 mm ±5%
Shore hardness (jacket)
90 ±5 A
Shore hardness (wire isolation)
70 ±5 D
Wire-Ø incl. isolation
1.85 mm ±5%
Material (wire isolation)
PP
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Diameter (core)
3× 0.75 mm²
AWG
similar to AWG 18
Construction (core)
42× 0.15 mm (multi-strand wire class 6)
Resistor (core)
max. 26 Ω/km (20 °C)
Single wire Ø (core)
0.15 mm
Material (wire)
Cu wire, bare
Cable weight [g/m]
56,1 g
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Pollution Degree
3
Temperature range
-25...+85 °C, depending on cable quality
Cable Type
3 (PUR)
Material (contact surface)
Ag
Material (contact)
Copper alloy
Cable identification
236
Switch off delay time
max. 20 ms
Mounting method
inserted, tightened
Additional suppressor
Diode/Z-Diode
Locking material
Steel (galvanized)
Material
PBT
Housing
Black plastic (gray on request)
Protection
IP67 inserted and tightened (EN 60529)
suitable for corrugated tube (internal Ø)
without
Rated surge voltage
2.5 kV
Locking of ports
M3 (recommended torque 0.4 Nm)
LED display
yellow
Form
10041
Material group
IEC 60664-1, category I
Operating current per contact
max. 4 A
Operating voltage
110 V AC/DC ±10%
No. of poles
3
Current consumption
max. 8 mA
Switch off peak
max. 250 V

7000-10041-2361000 Related Documents