7000-08011-2311000 Murr Elektronik Electronic Components

Product Details

• Torsion speed
  35 cycles/min
• Product article number of manufacturer
  7000-08011-2311000
• Cable length
  10 m
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Acceleration (C-track)
  max. 10 m/s²
• Torsion stress
  ±180°/m
• Travel speed (C-track)
  max. 3 m/s
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Bend radius (fixed)
  5× outer Ø
• Temperature range (fixed)
  -40...+80 °C
• Bend radius (moving)
  10× outer Ø
• Temperature range (mobile)
  -25...+80 °C
• Test voltage
  2500 V AC
• Nominal voltage
  300 V AC
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Current load capacity
  to DIN VDE 0298-4
• Jacket Color
  gray
• Outer-Ø (jacket)
  4.5 mm ±5%
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• Material property (jacket)
  CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Color (jacket)
gray
Shore hardness (jacket)
90 ±5 A
Shield
no
Material (jacket)
PUR
Stranding combination
4 wires twisted
Color/numbering of wires
br, bk, bl, wh
Wire-Ø incl. isolation
1.25 mm ±5%
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Shore hardness (wire isolation)
70 ±5 D
Material (wire isolation)
PP
Cable weight [g/m]
33 g
AWG
similar to AWG 24
Single wire Ø (core)
0.1 mm
Resistor (core)
max. 79 Ω/km (20 °C)
Construction (core)
32× 0.1 mm (multi-strand wire class 6)
Material (wire)
Cu wire, bare
Diameter (core)
4× 0.25 mm²
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Cable identification
231
Cable Type
3 (PUR)
Outer Ø
4.5 mm ±5%
No./diameter of wires
4× 0.25 mm²
C-track properties
10 Mio.
Material (contact carrier)
TPU
Material (contact surface)
Au
Temperature range
-25...+85 °C, depending on cable quality
Pollution Degree
3
Wire isolation
PP (br, wh, bl, bk)
Material (contact)
Copper alloy
Locking material
Zinc die casting, matte nickel plated
Compression gland
M8 (SW9)
Material
PUR
suitable for corrugated tube (internal Ø)
6.5 mm
Mounting method
inserted, tightened
Standards
DIN EN 61076-2-104 (M8)
Material group
IEC 60664-1, category I
Operating voltage (only UL listed)
30 V AC/DC
Form
08011
Rated surge voltage
1.5 kV
Operating current per contact
max. 4 A
No. of poles
4
Protection
IP65, IP66K, IP67 inserted and tightened (EN 60529)
Locking of ports
Screw thread (M8×1 mm) recommended torque 0.4 Nm, self-securing
Operating voltage
max. 50 V AC/60 V DC

Related documents 7000-08011-2311000 Specs