Applied Automation Controls Safety Products

By admin, December 3, 2014 8:06 am

Mitsubishi Safety AC Drive with an Onboard PLC    Meets SIL2 Safety Category


A800 Series

The A800 Series is Mitsubishi’s flagship inverter solution that delivers multi-use performance, accuracy and system flexibility in an ultra reliable hardware package designed for industrial use.

  • High Speed Response: With a speed response of 50Hz, A800 to respond to a change in motor load. A800 reacts to a speed signal much faster too – between 2 to 3 ms as opposed to 5 to
    20 ms with A700.
  • Wide Speed Range: 200:1 speed range open loop, 1500:1 closed loop speed range.
  • Extended Maximum Speed: A standard A800 VFD can drive high speed motors at up to 590Hz, compared to the A700’s 400Hz.
  • IPM Motor Control: Standard A800 VFDs can drive the new generation IPM (Internal Permanent Magnet) motors, such as the Marathon ‘SyMAX’ series.
  • Safety Stop: A800 is a SAFETY drive. “STO” capability enables SIL2 / PLd category emergency stops. Upgradable to SIL3
  • Compatible with USB stick: VFD settings can be easily uploaded or downloaded and ‘black box’ operating data at the time of a drive trip can be copied for diagnosis using the FR-Configurator software.
  • GOT interface: Automatic connectivity to GOT 2000 series GOTs without the need to change any parameters.
  • Improved PLC: A800 has a new internal PLC based around the Mitsubishi ‘L series’ processor. Instructions in the form of ‘Function Blocks’ can now be used.
  • Conformal Coating: All A800 VFDs have Conformal Coated boards as standard.

    Parker Safety Lockout Valve Insures Pneumatic Energy Isolation


  • Helps ensure a machine meets OSHA 190.147 standards for energy isolation during maintenance
  • Meets ANSI B11.0 and B11.TR6 requirements for an energy isolation device
  • Meets PMMI B155.1 requirements for an energy isolation device
  • Exhaust port equal to or larger than supply port as required by ANSI B11.0 and PMMI B155
  • Fast exhaust means less downtime during maintenance cycle
  • Visual verification of line exhaust with “pop-up” indicator as required by ANSI B11.0 and PMMI B155
  • 3 body sizes (Compact, Standard, High Flow) to fit different application requirements
  • Also available in Stainless Steel

Comments are closed

Panorama Theme by Themocracy